Procedure of quality control and production process


Industry I 2020-08-21, Number of views:44

Procedure of quality control and production process for cast aluminum from DR.LADDER

 

The raw materials (alu ingot )enter the factory.

    ↓

Enter the store house.

    ↓

Aluminum ingot Melted in furnace.

    ↓

Pour Alu liquid into mould.

   ↓

Press and cast into shape.

   ↓

Taken out the part from the mould.

   ↓

Parts natural cooling.

   ↓

Deburring and grinding the edge.

   ↓

Size, degree and surface checking with measurement and devices.

   ↓

Judged by QC and technician (if rejected->Analyzing The Process &

Take The Necessary Actions -> Reworks till eligible or rejected as scraps).

    ↓

Eligible.

    ↓

Put in the Transit area -> Packed with carton/ bag.

   ↓

Move to assembly area or fabrication.

 ↓  

Make surface treatment for the parts.

 ↓

Quality check after the surface treatment.

 ↓

Packaged into cartons.

 ↓

Put on the steel or polywood pallets Which can be lifted by forklift.

 ↓

Stored into warehouse or delivery out.

 

image.png

Remarks: The above process is for the general production process , the process for special products may be vary from above process.

More aluminum ladders, please visit our shop: http://www.tenda-safety.com/?products_30&ext_type=Aluminum