Description of the 5 major features of Dr. Ladder aluminum scaffolding


Industry I 2021-01-06, Number of views:4

9.jpg

Dr. Ladder aluminum alloy scaffolding is about 1200-2500 yuan per layer. The height of the single layer is 1.3 meters, 1.8 meters and 2.3 meters. The price has a lot to do with the configuration!


1. Special casters, most of them are made of special casters for aluminum scaffolding. They are of good quality and easy to move. They are not easy to enter the soil, cement and other sand and stone affect the use of the roller. The height can be adjusted. The uneven ground can also be used, but this The cost of casters is higher! It is about twice the unit price of ordinary casters on the market!


2. Aluminum frame configuration. The number of configurations determines the safety, stability and flexibility in use. For example, one pedal should be placed at a height of 1.8 meters, which is more convenient for workers to build. The crossbar and diagonal rods are reinforced to make the aluminum frame more stable. , Can protect the left and right sides at the same time, play a protective role. The ladder makes it easier for people to get on and off and is safer! The top is full of shops to prevent people from stepping on the air, equipped with skirting boards to prevent top items from falling, etc.!


3. The professionalism of the manufacturer of the ladder manufacturer, the aluminum frame is exquisite and precise, the construction error is small, the frame is stable, there is no error when the height is high, and it will not affect the use of high-level operations.


4. The rationality of the design can solve various tasks and breakage of the shelf. The aluminum shelf will be strictly tested after a long time of use, mainly including the long time, bending, deformation, and tube stuck in use. The influence of dirt, cement, and glue in use directly affects the experience of using aluminum scaffolding!


5. Service life, material hardness and thickness of aluminum. It’s not that the thicker the higher, the too thick and cumbersome, high-altitude construction is difficult to build manually, it is easy to stand unstable, can not hold, the risk of falling is high, too thin and deformation is affected by force, generally the thickness is 2.0-2.2mm below 20 meters The scope is standard, and the pedal design needs to be anti-rollover, waterproof and anti-corrosion and anti-aging. The caster brake needs to be stable!