There are steps on one side of the climbing car, and there are handrails beside the steps for users to board the platform. The other three sides of the platform are equipped with guardrails to ensure the safety of operators. The climbing car has a stable structure, convenient movement and safe use, which can greatly improve work efficiency and expand the operating space. It is an essential facility for climbing operations in factories, warehouses, shopping malls, supermarkets and many other places.
Industrial aluminum profiles have strict requirements on material, performance, and dimensional tolerances. Industrial aluminum profiles Although its profit is higher than that of architectural aluminum profiles, its production is relatively difficult, and its technical requirements are also higher. Especially the production technology of large-scale industrial aluminum profiles with complex flat widths and thin walls has a large gap with foreign countries. .
Step ladder can be used as a carrier for material handling and turnover, and Can be used as an auxiliary tool for ascending and picking up goods. Suitable for manual picking operations of light and small materials such as factories and warehouses. The surface of the climbing car is treated with epoxy resin electrostatic spraying, which has strong anti-corrosion and anti-rust effects.
Insulation ladders, etc. cannot be used as skids, supports, workbenches or other purposes, but only For climbing. Electric welding, metal ladders, such as aluminum ladders, must not be used when approaching any wires or electrical maintenance. If the ladder must be placed behind the door or on the passage, the door or passage should be provided with a fence or guards. When working on an aluminum ladder, face the ladder. If you face the ladder or in some cases, you should use a safety belt. Power cords, welding wires, belts, etc. are strictly prohibited from crossing the ladder.
Climbing step ladder If the length of the ladder is not enough, you need to connect two ladders. When using a metal clip, it must be fastened tightly or tied firmly with an iron wire. Before work, the ladder must be set up firmly, and it must not be shaken or tilted excessively. When using a ladder on cement or smooth and hard ground, the lower end of the ladder must be tied to the fixed object with a rope (rubber cover or rubber cloth can be placed on the lower end when conditions permit). When using a ladder on a wooden board or mud, the lower end of the ladder must be equipped with a pointed metal object, or a rope should be used to tie the lower end of the ladder to the fixed object.