Climbing cars are divided into assembly type and non-assembly type (ie welding type). Welded climbing cars are cheap, and delivery is not so convenient and expensive; assembly The type of climbing ladder is relatively expensive, but it is convenient and cheap to ship. Both types of climbing vehicles have their own advantages. Customers can choose by themselves.
Mobile platform ladder is made of high-strength square pipe, angle iron, steel pipe It is made of the frame and made of non-slip patterned steel plates as steps. Two casters with brakes are flexible and convenient to move. Climbing high ladder (car): The climbing ladder is made of high-quality steel with high-quality casters; it can be used as a material The carrying tool for handling and turnover can also be used as an auxiliary tool for ascending and picking up goods.
The working principle of the hydraulic system of the hydraulic lift freight elevator: when the hydraulic lift freight elevator rises, the electric control system controls the motor to rotate, Drives the gear oil pump to rotate. Under the action of the oil pump, the hydraulic oil enters the oil cylinder through the oil filter, the one-way stop valve, and the electromagnetic reversing valve, and drives the piston rod of the oil cylinder to move upward.
Ladder must be run-in maintenance during the running-in period. The machine is running as specified When used within the compliance period, you need to use it in accordance with the corresponding regulations, and comprehensively check the lubrication and tightening conditions, observe the condition of each part of the entire ladder, and solve the abnormality in time. The focus of the walk-in maintenance is to replace the lubricating oil, lubricate each part, and tighten Each bolt. After the end of the running-in period, perform a secondary maintenance.
Out of service maintenance, when it needs to be out of service for a period of time due to factors such as seasons, outage maintenance is required. Mainly do cleaning, plastic surgery, matching, anti-corrosion and other work. Storage and maintenance shall be carried out carefully in accordance with the storage requirements to reduce the erosion of the long-term storage ladders caused by natural weather.