Aluminum ladder is one of our commonly used tools


Industry I 2020-09-15, Number of views:17

   

Aluminum alloy ladder A key issue facing enterprises is that independent R&D and innovation of patented products is not enough. Who can have a limited grasp of the strength of product upgrades, then,  Who can trade.  An enterprise without product research and development is always a follower of the market, and it is difficult to achieve big performance


What specifications are used for the ladder platform  Platform steel grating is a widely used steel grating product in recent years. This kind of steel grating is widely used in various fields of industry and has strong resistance to surface impact, especially the spacing of crossbars.  The 50mm steel grating has strong resistance to lateral impact.  Ladder platform steel grating features. The ladder platform steel grating can be welded around with kick plates (side retaining plates), checkered plate guards, and attachments and other accessories.  The steel grating of the ladder platform is covered with flat steel of different specifications from the carrying flat steel, or with angle steel, channel steel, square pipe, etc.


Aluminum alloy ladder bridge and the use of grounding are to ensure that the test phase forms a closed circuit, so that the instrument can be tested correctly  Waveform.  It should also be noted that the workplace must be systematically connected to each other, so that people, equipment, high-voltage equipment and measurement ladder bridges are connected twice.  Ensure personal safety and good equipment.


Ladders are representative of the tools we use every day. According to the use of different fields, the functional requirements of the ladder are also  Will be different.  Since the use of more common ladders nowadays, folding ladders are more representative, so what are the different materials of general folding ladders?  What are the main advantages of the ladder?


Before using the ladder every time, you must carefully check the ladder surface, parts, rope, etc. for cracks and serious  When using a ladder, you should choose a hard, level ground to prevent the risk of side tilt; if the ladder is used at a height of more than 5 meters, please be sure to set up a F8 or higher cable in the upper part of the ladder; check  Whether all ladder feet are in good contact with the ground to prevent slipping; without the permission of the manufacturer, the ladder will never be attached to other structures, and the damaged ladder will never be used or repaired; when the ladder is raised and lowered, it is strictly forbidden to hold the cross brace.  To prevent cutting fingers.