In order to reduce the friction of the nut on the floor; at the anchor bolts, padding steel shims of different thicknesses between the chassis and the foundation stone to adjust the verticality of the guide rail frame; install three standards Section, and use theodolite to measure the verticality of the rail frame to ensure the verticality of each main pipe of the rail frame in two directions (1/1000); after the rail frame is adjusted to be vertical, press down 4 anchor bolts; adjust the fence door frame as above The verticality, press the rest of the anchor bolts; install buffer springs;
the other half of the fence Connect with the front half with bolts; adjust the verticality as above to tighten the anchor bolts, and loosen the brake on the motor in the cage. (SC200/200 type first install the cage and then install the drive plate). Lift the hoisting cage with a crane and place the hoisting cage accurately from above the standard section; put the two hoisting cages on the guide rails respectively, and slowly place them on the buffer springs. Prepare the drive frame of the two cages.
Elevators, also called freight elevators, are used for transportation between building floors The special cargo elevator products are mainly used to transport goods between various working floors; three-dimensional garages and underground garages are used to lift cars between floors. The hydraulic system of the product is equipped with anti-falling and safety protection devices, and operation buttons can be set on each floor and the work surface of the lifting platform to realize multi-point control. The product has strong structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance. It is an economical and practical low-floor elevator to replace the ideal cargo conveying equipment.
Aluminum alloy ladderSingle mastAluminum alloy elevatorDWSJ1/The single-mast aluminum alloy elevator adopts high-strength and high-quality aluminum alloy material, which has the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability, etc. It is widely used in factories, hotels, restaurants, stations, airport theaters, and exhibitions. Pavilions and other places are safe companions for maintenance of equipment, paint decoration, replacement of lamps, electrical appliances, cleaning and maintenance. Cylinder-type elevators are uprightly raised with multi-stage hydraulic cylinders.
The elevator should work strictly in accordance with its specified carrying capacity, work may cause personnel and cargo damage; in the absence of safety guardrails Working on the elevator will cause people to fall and cause people. In order to ensure that the elevator is in good working condition, perform a performance check before use: whether the control button is effective; whether the power cord and socket are intact; whether the oil pipeline is intact; the stability of the guardrail; the tightness of the bolts at each junction; the appearance quality is intact.