Analyze the manufacturing process of insulation ladders for you

Industry I 2020-09-15, Number of views:14


Mobile platform ladder, the insulating ladder adopts high temperature polymerization pultrusion manufacturing process, and the material is epoxy resin combined with pin technology.  The surface of the aluminum alloy material is anodized, and the surface of the shaft steel part is coated with a protective coating; the processing surface of the insulating laminated material is treated with an insulating paint.  The ladder brace and the ladder foot anti-skid design are not easy to fatigue, the shape of each part of the ladder has no sharp edges and corners, the safety degree is high, the insulation performance is strong;

Before use: Every time you use the ladder, you must carefully check the ladder surface, parts, ropes, etc. for existence  Cracks, severe abrasion and damage that affect safety; when using the ladder, choose a hard and flat ground to prevent the danger of side tilt; if the use height of the ladder exceeds 5 meters, please be sure to set up a F8 or higher cable in the upper part of the ladder; check all  Whether the ladder feet are in good contact with the ground to prevent slipping; without the permission of the manufacturer, the ladder will never be attached to other structures, and the damaged ladder will never be used or repaired; when the ladder is raised and lowered, it is strictly forbidden to hold the cross brace, [  0] to prevent cutting fingers.

For mobile platform ladders, you need to carefully check the ladders and pedals for deformation and damage before using aluminum ladders  Phenomenon, whether the bolt nails are loose, and check whether the fixed rod of the ladder is effectively fixed, and whether the anti-skid sleeve is installed at the bottom of the ladder; if the aluminum ladder is damaged, it needs to be repaired immediately or  Update.  In addition, it is strictly forbidden to paint the wooden ladder, because the paint will cover up the problem of the ladder.  Three-legged orchard ladder, this kind of orchard ladder is light, safe and stable, and the ultra-light aluminum ladder with hollow welding can be lightly transported and used in the garden.

The stable three-legged ladder is also uniquely designed with the ground grip, plus adjustable height steps.  Let the ladder can easily cope with the various terrains of the garden and the height of the trees.  The movable herringbone ladder connects the tops of two ladders with a loose leaf, and can be combined when moving. Because of its flexibility, it is widely usedUsed by renovation workers.  Movable herringbone aluminum alloy ladder, you can walk around with the ladder when no one is on the ground. Such aluminum alloy ladder brings a lot of convenience to the decoration workers, especially when the house is painted, there is no need to go up and down.  Work on the ground and walk directly on it.

The mobile platform ladder, under the leadership of the new era thinking, environmental protection is also an issue that we cannot ignore. Among them, aluminum  The alloy is very consistent because its low melting point (660 degrees Celsius) is easy to regenerate, and it is pollution-free for production or disposal, which is conducive to our environmental protection mainstream and is in line with the sustainable development strategy.  It is also our best choice!

[  h]