Mobile platform ladder For this kind of aluminum alloy ladder, if you want to have a favorable price, on the one hand, it depends on your wholesale quantity, on the other hand It depends on the quality of the manufacturer of this aluminum alloy ladder, but no matter what, you must choose a regular manufacturer. A suitable environment is a key factor for the maintenance and storage of a herringbone ladder. Different types of ladders have different requirements for the storage environment. Generally speaking, ladders are suitable for storage in a dry, well-ventilated indoor environment. Like Some metal herringbone ladders should also pay attention to anti-corrosion and anti-oxidation.
The material of the sub is aluminum alloy, which contains a variety of metal elements, of which there must be metals that will meet water Corroded. However, through understanding of the aluminum alloy company, the aluminum alloy ladder materials they produce are all oxidized. Don't underestimate this thin oxide film. The protection of the entire ladder is very important and has a great effect. of. Therefore, the conventional mobile platform ladder is not afraid of water.
There are steps on one side of the climbing ladder (there are handrails beside the steps) for users to board the platform, the platform[ 0] The other three sides are equipped with guardrails to ensure the safety of operators. The working surface of the platform can accommodate 1-2 people standing, turning and moving. Regularly check the connection parts and add lubricating oil when necessary; harsh environmental conditions will reduce the service life of the ladder. Generally speaking, its service life is 2 years indoors and 1 year outdoors. Aluminum stents are easily soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, but hardly soluble in water. The relative density is 2.70. Melting point is 660°C. The boiling point is 2327℃.
The content of aluminum in the earth’s crust is second only to oxygen and silicon, ranking third in the earth’s crust Rich in metal elements. The buffer on the construction electric elevator is a line of defense for the safety of the construction electric elevator: it must be installed. It must have a certain strength, can accept the impact of the rated load of the electric elevator, and play a buffering role. And now many construction sites, although some have installations, but they are not enough to serve as a buffer.There is no buffer at all, it is wrong to hope that the use of units will not underestimate this line of defense. It is widely used in cargo platforms and mobile loading and unloading places without loading and unloading equipment.
It is a cargo handling auxiliary equipment used in conjunction with a forklift. Through the hydraulic boarding bridge, the forklift can directly enter the interior of the automobile container for batch loading and unloading operations. The use load of the steps on the ladder for people to go up and down shall not exceed 1100N. When there are special operations on the terrace and the weight exceeds the above-mentioned load, check calculations should be carried out according to actual conditions. To prevent sinking or instability after being loaded; the upper end of the ladder must be fixed and fastened, and the slope must not be too large to avoid slipping during operation. After the ladder is extended, its stability will be reduced, so if the ladder needs to be extended, reliable connection measures must be provided.