About the design plan of the tank body ascending workbench platform ladder
Material: aluminum alloy;
Load: more than 300kg;
Structure type: movable , The overall structure, the bottom pulley should have a fixed pedal,;
Protective hinge: the guardrail should be protected by a hinge at the side of the person; the climbing ladder should be equipped with a protective strip to prevent people from falling;
< p>Color: light gray, color code RAL7035;
The top surface of the overhaul platform and the tank should be fitted with a curved surface, and the curved surface should be fitted with anti-collision strips to avoid hitting the paint surface. /p>
A portable movable buckle is fixed to the side of the tank body; the fixed part of the buckle is connected to the tank body.
The manufacturer provides a gripping interface ruler within two working days Inch.
1. Dimension requirements and information provision
The drawings or documents to be provided can at least reflect the specific structure, important dimensions, installation, and Disassembly and use instructions, etc.
The height of the platform: ~4500mm; (From the bottom of the platform to the plane where the maintenance personnel are standing during the overhaul, see the corresponding size in the figure;)
The height of the guardrail: not less than 1000mm;
The width of the platform: no more than 1500X1400mm, see the corresponding size in the attached drawing;
The length of the platform can be determined according to the specific structure and reflected on the manufacturing drawing.
2. Implementation standards
The maintenance platform is an engineering tool for high-altitude operations. In order to ensure the safety of use, the platform must be manufactured in accordance with the relevant national operating industry standards.