Pay attention to these points when using mobile platform ladders


Industry I 2020-09-15, Number of views:12

   

Pay attention to the load requirements of the mobile platform ladder.  When there are special operations on the terrace and the weight exceeds the above-mentioned load, check calculations should be carried out according to actual conditions.  The bottom of the foot of the ladder should be solid and should not be used by raising it.  To prevent sinking or instability after being loaded; the upper end of the moving ladder must be fixed and fastened, and the slope must not be too large to avoid slipping during operation.


There are many forms of mobile ladders, including: mobile ladder , step ladder, fixed straight climbing ladder,  Hanging ladders, telescopic ladders, bracket ladders, hand ladders, bamboo ladders, single ladders, straight ladders, climbing ladders, etc.  Movable aluminum alloy walking ladder, you can walk with the ladder when people are not on the ground. Such aluminum alloy walking ladder brings a lot of convenience to the decoration workers, especially when the house is painted, there is no need to go up and down.  Work on the ground and walk directly on it.


There is a premise that the ladder must be light.  If you go to the right, put your body's center of gravity on the bracket on the right, and then use your legs to slowly retract the bracket on the left to the right. Early herringbone ladders were generally made of wood. With the development of the metal industry, aluminum alloys are now used.  material.


The climbing ladder can be used not only as a carrying tool for material handling and turnover, but also as an aid for ascending and picking up goods  tool.  Suitable for manual picking operations of light and small materials such as factories and warehouses.  The surface of the climbing car is treated with epoxy resin electrostatic spray, which has a strong anti-corrosion and anti-rust effect.  One side of the climbing ladder is equipped with steps (there are handrails beside the steps) for users to board the platform, and the other three sides of the platform are equipped with guardrails to ensure the safety of the operators.


The general size of the working surface of the platform can accommodate 1-2 people standing, turning, and moving.  Users can complete actions such as stacking items from high places such as shelves on the platform of the ascending car.  In addition, the ascending car is equipped with casters, which can be pushed and pulled by the user to move, which is convenient and quick.