Do not exceed the maximum load-bearing mass indicated during operation


Industry I 2020-09-15, Number of views:10



Use the elevating step ladder for climbing, and the angle between the ladder and the ground is 60°~70°.  At the construction site, high-altitude operations are often carried out under climbing conditions with the help of climbing equipment or climbing facilities. Such operations are called climbing operations, also known as climbing operations.  Do not stand on the steps within 1 meter from the top of the ladder during operation, always keep a safety height of 1 meter, let alone climb the highest support point at the top.


It is forbidden to exceed the marked maximum load-bearing mass during operation.  Check that the ground is not slippery. The ladder should have anti-skid pads. If the ground is slippery, try to fix the feet of the ladder so that it does not slide. The angle between the ladder and the ground should not be too large or too small. Fasten your seat belts.  There must be a place to hang a seat belt.  Climbing the step ladder saves materials, adopts the method of saving materials under the same load conditions, correspondingly reduces the data of the supporting structure, reduces investment information, saves labor, saves time, avoids cleaning and maintenance,


 

The structure is simple, the bolts can be clamped on the pre-installed bracket, saving production time, no on-site treatment , the equipment is very flexible, durable, hot in the factory  Before the anti-corrosion treatment of zinc dipping, it is corrosion-resistant and corrosion-resistant.  The steel ladder treads should be disassembled on the ground before installation, and placed according to the platform drawing number and installation sequence.  Most of the industrial aluminum profiles have strict requirements on material, performance, dimensional tolerances, etc. Although the profit of industrial aluminum profiles is higher than that of architectural aluminum profiles, it is also relatively difficult to produce and has higher technical requirements, especially complex  The production technology of large, flat, wide and thin-walled industrial aluminum profiles is still far behind foreign countries.


According to different places of use and requirements, the climbing ladder will have different designs and sizes, and a variety of styles are available  Manufactured according to the idea to meet the specific requirements of the specific field. The size of the climbing ladder is determined according to the passage and safety factors. The movement of the casters and the stable safety guarantee of the foot brake ensure the flexibility and safety of the use of the climbing.  Ascending ladders are divided into warehouses in typeLadder, shopping mall climbing ladder and folding climbing ladder, etc., combined with the use of shelves and trolleys, can greatly improve production efficiency and distribution efficiency, and become indispensable operating supplies for factories and shopping malls.